Doug Johnson - 07/18/99 16:32:23
My Email:dojojo@aol.com

Comments:
Aluminum siding. I use aluminium offset printing plates from the local newspaper. Can be cut with a utility knife. I use the grooves in a saw table for ridges for some rooofomg, but will look for the paper roller. Keep up the good

Comments:
Good site. Do you have any comments about the Barry's Big Train engine and wheel conversion for Bachmann big Haulers. One of our members has one and there is difficulty going over switches. (Vermont GRs

Comments:
excellent - very helpful tips on Shays and Climaxes. keep up the good work!

Comments:
Thanks for all the help you have given us.Your site is the best thing since canned beer.

Comments:
Greetings from the Eternity Diamond mines and Logging RR here in York, England. Both the line and web page are still under construction. The line is G scale and so far does the 2 short sides of the garden. Not much runs yet as I am concentrating on earthworks and have been digging and mixing concrete for weeks now. The fleet so far: No1 Annie a detailed, weathered and sound fitted bachmann shay. No2 Glypta a climax still as it came (only had a couple of weeks) A goose accucraft (owned by my partner who has running powers Progress is slow because I help run the Festiniog Railway in Norht Wales which takes up a lot of my spare time Regards Paul

Comments:
Your articles have been a real help, thanks!

Comments:
I appreciate all of your posted information. It has been a great help! Thanx

Comments:
Geo. Ihaven't seen anything on your site about B'mass's fix for the Climax. I.E., the problem with the drive shafts, binding, and squeaking. B'mann now has a replacement drive shaft that in effect allows the shaft to free wheel and eliminates torque transfer etween the front and rear truck thru the gear box. My climax would slow down markedly on curves along with developing the squeak reported by others. After installing the new redesigned rear drive shaft the binding on curves has been cured along with the squeak. Irv at B'mann can supply the replacement drive shaft. By the way, thanks for your tips on improving the Lionel Atlantic. I've used most of your suggestions on 2 of these engines with good result and now have a couple of engines that run and pull well.

Comments:
Great! I never before found so many useful hints and tips about model railroads in one site. Greetings from Germany Bernd

Comments:
Thank you for your efforts. You have a very nice site!

Comments:

Comments:
Great web site! I have read, copied and used many of your LS tips I was in HO for many years and your tips have helped in my transition to G scale. Thanks

Comments:
Thanks for an interesting sight. I am just contemplating rebuilding my fiance's 10 wheeler and found your article most helpful. I'll let you know how i get on Paul

Comments:
Just starting a Civil War era G-Scale layout in my garden. Have plenty of plants need just about everything else, plus help. Interested in kits, or plans for scratch built structures. Like the American 4-4-0 but not sure it falls within this era proper y. E-Mail picked up regularly. Thanks

Comments:
What a fantastic site!!! An absolute Godsend for a new-garden-railway-bulilder such as myself. Thanks VERY much, George!

Comments:
You've helped me a lot in the last 2-3 years, thanks. Ian

Comments:
George Apologies for the geographically confused PS on my last - the snow bamboozled me into thinking Green Valley Lake was a lot further north! Rod

Comments:
G'day from Down Under! I came across your site as a link from the Toenail Ridge Shortline - the more I check out sites like yours, the more tempted I am to give up my HO layout and get Large! I bought my elder daughter one of the original Big Haulers for her 2nd birthday (she' now 12) and it has done sterling service around the Xmas Tree each year, but seeing layouts like yours make me want to head outdoors. I am a geared engine freak, and the Bachmann Shay and Climax are cruel temptations, especially for someone whose eyesigh is failing and whose HO Shays, Climaxes and Heislers are getting very fuzzy around the edges! Thanks for your inspirational site - I shall outdo Macarthur and return more than once to explore further. Regards in Railroading Rod Tier PS My daughters' Choir is hosting an Alaskan Children's Choir on their visit to Canberra in a few weeks - I shall ask the girls billetted with us if they know of Green Lake.

Comments:
Great Page! Thanks for the advice!

Comments:
I am a recent convert from HO-scale to G-scale, and I can't thank you enough for all the valuable and helpful information I have received from your Web site and from your postings at LSOL. Jim C.

Comments:
Depend on your site for most technical issues. Find them very easy to understand and follow. i have only been in the hobby 2 years and probably would not be enjoying it as much without your tips. I have used to many of them to name. Also enjoyed traveling to Alaska with you.

Comments:
Great Site!! I have the Bachmann R/C Big hauler, which I found second-hand for only £20!! Your tips on It were facinating, and I have installed the capacitor which makes the sound better, it works great!! I am re-painting the loco in Rio Grande Black, It ooks much better than the Green it came in. As i am from the UK I was wondering if you have any other information on the R/C locos? As mine works great.

Comments:
Really nice site. I am a newcomer to the hobby and started with an old RC Big Hauler. I have had the RC control upgraded and I worked on the front trucks the front and rear wheels now swivel independently. Will sure be trying some of your Tips. Thanks a l t...Tom

Comments:
Just looking for help on Arist Streamline passenger cars. The distance between the cars is too great. I would like to get them a little closer. Is this possible?

Comments:
George, I've been to your site so often in the past six months, I finally printed it out and filled a binder with it. The info you and others put out really helps us newbies get started. Keep up the good work. I intend to check back weekly. Randy

Comments:
Cool page dude. Need some more pictures though.

Comments:
Great site, but I can't find your tips section. I previously checked out your constant lighting tip, but seem to have lost the link to it. You have great tips and I'd like to be able to find them. Thanks. Geoff

Comments:
Neat site

Comments:
Thanks very much for so much helpful information. one question, do you have the circuit for the aristo/rogers 2-4-2 tender sound unit or do you have a source for the bachman 4-6-0 unit. AJW

Comments:
Hi George, I really enjoyed surfing through your pages. I have seen quite a few details on your layouts which are worth beeing transferred on my own rolling stock. (I especially like the weathering of your stuff!) That's all for now! God bless you all! From Germany Manfred

Comments:
Hallo, George, you have a very nice Site, very nice and interesting. Best greetings from the old Germany and good luck to you all days !! Your R.Steckmest

Comments:
After 50 trips to your site, I felt guilty for using you without signin' in. Thanks again.

Comments:
Great site. Found some very helpful infoemation here. I am glad there are people like you in large scale that are willing to share your experteze with thoes of us that are new to large scale. I will visit this site again. Keep up the good work. Without so e one like you many newcommers to largs scale would not stay. Thanks for this site. John Corradini

Comments:
Just like to thank you for taking the time to offer this valuable info to the hobbyist. It has beem bookmarked

Comments:
I am looking for web sites that have pics and info of the steam trains. I once found a listing that contained many of the trains built, their status, location and heritage, but I seem to misplaced its location. If mabye you know of a similuar site pleas e mail me. PS I loved youre pics, and youre whole page is fantastic!

Comments:
Thanks for the great information site. I found it when I visited large scale on line. I found some very helpful information here. Will surely come back again amd again. Once more thanks for your time and effort to be helpful to all large scalers. Well don keep up the good work. Thanks John Corradini

Comments:
Thanks for the great information site. I found it when I visited large scale on line. I found some very helpful information here. Will surely come back again amd again. Once more thanks for your time and effort to be helpful to all large scalers. Well don keep up the good work. Thanks John Corradini

Comments:
Thanks for the great information site. I found it when I visited large scale on line. I found some very helpful information here. Will surely come back again amd again. Once more thanks for your time and effort to be helpful to all large scalers. Well don keep up the good work. Thanks John Corradini

Comments:
Thanks for publishing the plans for the truss bridge. I built one just under 4 feet long during the Memorial Day weekend. Right now, it doesn't go over anything, since my tracks are laid flat on a deck. Some time this summer the layout will be moved in o the garden, and I'll dig a gully for it. Thanks again. --Wayne J.

Comments:
Hi George, I contacted you re tips on a Lionel Atlantic and you e-mailed me a link to your site. I have spent several hours enjoying the mass of material you have compiled. Thank you for giving so much of your time in making this amount of information t all of us. I printed off a number of your articles to enjoy later. I'll be sure to check in periodically to browse some more and to swipe some more good ideas. Thanks again.

Comments:
Thanks for all the great tips. I'm just starting out in large scale and have learned a lot from your pages! One question though... I followed your methods for "Better Bachmann Sound" and now the speaker emits a constant very low level of noise. I've tripl checked the work and it's correct. Any thoughts on what might be causing the static? Thanks.

Comments:
George, very nice web site. I used your plans for the Howe Truss and built a 6 foot bridge out of redwood and stained with redwood stain. I also blackened all the brass so it looks more realistic. I can send you a picture if you can use it. Many thank for a beautiful job.

Comments:
Enjoyed visiting your site. It's full of useful information and great pictures. Although my G scale layout has been removed from my yard, It will be rebuilt in the loft of my barn in the future in the hope that it will lessen the maintenance load on me. hanks for the nice web site.

Comments:
Unbelievable! I'm in awe of everything; the scope, knowledge, pictures, writing, EVERTHING! I'm just thinking about getting started with large scale trains. If I take the plunge, I'll certainly be back to take advantage of your site.

Comments:
Great site. A real plus to a novice like myself. First place I look to answer questions and get ideas. Thanks for making this info available to me

Comments:
Great site George, keep up the good work. This is one of the best sites I have been at. I have you in my Favorites folder. Thanks, Dylan

Comments:
Wonderful site, full of useful information and interesting pictures of your work. Looks like you enjoy the getting there as much as the arrival. Good train philosophy! Except for a train running around my son's bedroom, I haven't set up my REAL Railroad yet, so I enjoy all your notes on equipment. I have purchased two pacifics with heavyweights for the eventual road, But I am still deciding on power, track & etc. Righ now I am focusing on Aristo Craft track and some form of DCC. I like operations. Thanks again for the ehospitality.

Comments:
George, I want to set up a G scale railroad in my garden and would like to know what is the best material to use to so that I can attach my track track to it. Any help that you can provide will be appreciated. Thanks.

Comments:
Former Private Car owner: UP 6105,(Dorm. Lounge); UP Natl. Prog.(6 rmete, 4 bdrm, 6 sect. Pullman); UP 6009,(Dorm. Baggage); ATSF, (Business Car #9). Interested in HO, G, 1.5 inch scales, live steam. Amateur Radio Opr., W6QLB. Like old Pontiacs. Work as a Conductor on the UPRR (former SP).

Comments:
George; Iam just starting in large scale & use your tips befor buying anything Thank YOU SO MUCH BOBBIE R. ALLEN JR.

Comments:
Thanks for the Shay info pages. Very useful. I'm just getting into G scale railroading, but only plan to have a round the room above the doors version. Cheers!

Comments:
George, you made my day. I've been trying to solve the mystery of connectivity on an outdoor G gauge layout I'm in the process of laying. Finding your "Large Scale Soldering Tips" is just what I needed after a couple of weeks of frustrating answers to que tions and trying several non-solutions. You are absolutely right about the 100 watt soldering iron. Thanks for a VERY professionally written and well detailed solution to my problem of today. Now I plan on scanning every inch of your site for similar gold n tips.

Comments:

Comments:

Comments:
Hey george great site !! I own five aristo pacific's 3 blue comets + 1prr k-4 = 1 sr cresent (witch feel in my new pond last summer) and I run the k-4 & blue comet togher pulling my prr heavy weight coaches on close to a 2.5% grade horseshoe curve and the perform falwesely without slipping!!!

larry kastriba - 04/06/99 00:23:26
My Email:strib@epix.net

Comments:
this is the best large scale site on the web i have got more helpful hints from your site than i have from 5 years of GR,BTO,and all the other large scale pubs out there Your site is booked marked on my computer keep up the good work

Comments:
A great mirror to see the world of Large Scale in. It's my second favorite site! All the best, Lewis Polk

Comments:
I've been into G-gauge for just a couple of years now and every single time I find a problem or have a question, I find myself refering to your pages. Now I just check in to see what's new. Thank you very much for all the effort you've put in for all of u .

Comments:
You folks might be interested in my site: http://www.choochoocam.com This is my track powered, TV quality, full color video camera for model electric trains For further info contact me through the site or at sgreiner@wwnet.com Skip Greiner

Comments:

Comments:
Built your Howe truss bridge and scaled the sides in half for another.(no upper cross beams, of course) I have 3 wyes and am wondering if something can be added a, to slow the train down before it reverses and b, to stop it for some time(5-15 secs) before reversing? SUPER SITE!!!

Comments:
I have been in trains over 35 years but am new to large scale.I like your artical on the Aristo C 16 and think this will be my next loco. the quarter inch to hi is ok with me

Comments:
Love your page. I have just started a 1:20.3 indoor layout with B-man Shay & Climax after 25 years of HO. Thanks for the plans for the Howe truss bridge, have been looking for good plans.

Comments:
back again, great site ! I'm working on a way to trigger crossing signs, looking at infrared beam, or for a better way... anythoughts ? I dont like the "Lifelike" pressure switch, plus we have 2 main lines, it gets complicated doesn't it ?

Comments:
A very remarkable site. Keep up the good work. Thank You

Comments:
This is the best site that I've found on the internet, other than the NMRA site. Very informative, as I keep coming back to it for more information. I've had my G scale around my living room ceiling for two years, as I hope to start my Garden Railway outd ors this summer. Trenton, N.J. isn't really into this growing hobby yet.

Comments:
i wood like to see pictures

Comments:
I am enjoying your site. Keep up the good work. I have two G Scale Bachmann trains sets and I am trying to figure out how to set up a display in a small room. Any ideas on where to find layouts for a room (possibly suspended)?

Comments:
very interesting and useful ps have you had any trouble with the electrical pickup from the wheels on the bachmann shay?

Comments:
THANKS GEORGE, GREAT STUFF. JUST STARTED THIS BIG STUFF AFTER DECADES OF HO. WHAT FUN! I BOOKMARKED YOUR PAGE FOR EASY CONTINUED REFERENCE FOR MY NEW PARDEE AND CURTIN SHAY. THANKS AGAIN

Comments:
George, Great site, many hours of reading ahead of me. all the best from Down Under Steve Omant, Tasmania, Australia

Comments:
George THANKS A MILLION for your site and tips. I found that the new onboard 5490 has a 12 v regulator in addition to a 5v regulator. The problem with the new 5490 is that the input current goes from appox 20ma with an input voltage greater than 14 volts to appox 200ma (.2A) when the input voltage is l ss than 14 volts thereby draining my battery much faster when it is below 14 volts.I cut traces and bypassed the 12 reg. to fix the problem. Chuck Haverlah 805 493 1737

Comments:

Comments:
At long last I found a price on a Shay that I could afford. Thanks for all your tips and information. How about some input on sound units that you might suggest? Richard Dahlke Round Rock, Texas

Comments:
George: Your site is one of my favorites!! Great information and very nicely presented!! Keep up the great work!! Rich Muth

Comments:
George: What is the color of the rerailer on WP&Y #109? The shovel noses have orange rerailers, but from your color pix, it seems to be red or red orange -- definitely much darker/redder color than the shovel noses! thanks Bill Dippert

Comments:
Appreciated your pictures of the WP&Y diesels. They confirmed what I saw in Railfan & Railroad magazine about the painting of #109. My LGB version still needs more areas painted green. I appreciated your technical tips section. Even though I have been in model railroading since 1947, there is always something new to learn, particularly in a brand new scale/gage such as I am now in with the outdoor G railway. Bill, the iconoclast, Dippert MMR #93

Comments:
Hints on Shay are very helpful.

Comments:
Thank you for putting together such a helpful site ! I just started into model railroading this past December and your site certainly addresses quite a few areas not answered from other sources.

Comments:
Great site George. As a newcomer to this hobby, I have been able to learn an awful lot about it from your site, as well as reading the workshops at LSOL. Keep up the great work. Jay

Comments:
I'm new at this scale and already you have provided valuable tips and guidance. Thanks

Comments:
I.m new to the web, so I ope I have the above boxes correct, I like the Wrecks and relics page, I wil see if I can find one for you. Graham

Comments:
GREAT

Comments:
Love all your info on LSOL and finally had time to visit this site for a moment. Especially like the FAIRPLEX page. I hope that this year my wife and I will get involved with FairPlex. Dwight

Comments:
THE BEST LARGE SCALE SITE ON THE NET!!!!!!

Comments:
Some of your ideas have been a great help. I put an ell on the blower of my U-25B's to take care of the kinks in the blower tube. Made them from fish tank parts. Keep up the good work.

Comments:
I would appreciate some suggestions about making casting molds. I bought 2 lbs of CULINART silicone plastique, haven't tried it yet. I've scratch built a dozen or so logging related cars in 20.3 scale. Photos in Dec. issue of Finescale Railroader, letters to Ed.I want to duplicate hand carved parts."HELP" Thanks DJ

Comments:
Thanks for the page!

Comments:
Thanks for maintaining your web site. I don't have a garden railroad yet but, am planning to start one this spring. I can tell that your site will be very informative to me - you're bookmarked!

Comments:
Not only well organized and thought out but very informative too. Well done!

Comments:
Great Site! I'm new at this having just bought a Lionel "G" scale Christmas train, Dec'98, when my wife said we should get 1 car for every year since my daughter was born. As she is only 4, I didn't have much trouble finding Christmas cars dating back o ly a few years. . .but what started as a Christmas train has blossomed!!! We found Marklin MAXI and bought a 1998 Christmas car from them, that was the start of my trouble. There is very little information on the various scales that actually make up what is called "G" scale. WHY?!? Marklin Maxi cars are true Guage 1, with a cale of 1:32. My Aristo Christmas Car is a 1:29 "G" scale. Lionel & LGB seem to be true narrow scale trains at 1:20 to 1:22.3 "G" scale. I don't have a Bachmann car, but I have a USA Trains car which appears to be about 1:29. I love them all, but have started to buy Marklin Maxi cars. We picked up all the Museum Cars they made and plan to keep that up, as well as their Christmas cars which were first produced in '98. I now have 2 locos and some other Marklin Maxi cars. I don't regret the money I spent on other the narrow guage "G" scales, but I don't understand why such an obscure & arbitrary designation is used to describe all these different scales of trains. Why not just call them what they are? Or perhaps we could adopt the european terms of Guage 1, Guage 11m, etc. Anyway, great page, keep it up.

Comments:
Hi George- Great Web site!! I'm really just getting started in G scale. We got a Bachmann Big Hauler set several years ago for the kids to use around the Christmas Tree. This last Christmas, I got tired of fighting problems with bad track and electrical connectio problems so I started to search the Web for answers and found your page. What a wonderful find! You have all the answers I'm looking for. Taking your advice, my plans right now are to get some new track (Aristo Brass) probably from San Val unless you can suggest someplace better. I want to overhaul the engine and incorporate most of the tips you suggest. I guess the other thing I need to o is start replacing the plastic wheels with metal ones. It's my dream to be able to start a garden railroad set-up in my back yard sometime in the future. Anyway, thanks for the information, I'll be visiting the Web site many times in the near future. Terry

Comments:
You have a terrific site. I am a newcomer to large scale and find your observations the best source of just about everything......

Comments:
As a newcomer to large scale, it's great to have your site to check out and learn from. Keep up the great work. Greg

Comments:

Comments:
Great pictures from the garden layout at the LA fairgrounds. Wished I lived in a warmer climate to do it all year, hard to do in Upstate New York with several feet of snow on the ground. Thanx, Scooter

Comments:
Enjoyed the photos and am anxious to come back for more info from your tips. You have an exellent website!

Comments:
You must be The authority on everything there is to know in G scale. I have seen your comments on the Aristo Forum and truly enjoy reading everything you have to comment on. You are sincerely a huge asset to this hobby.Please keep up the excellent work. I look forward to meeting you someday in my travels. We have an RV and will be in the Las Vegas area for about a week between Feb14 through the 20th. I live in Vancouver BC. Look forward to hearing from you ! John

Comments:
so far I have enjoyed most of the work. As a beginner anything others have been through helps. How about advice on what wires to use underground?

Comments:

Comments:
I really enjoyed to tour and have downloaded some of your notes and plan to download more. I have some aristo stuff and am in the planning stages. I have made a decision to go R/C and am going to use aluminum track. Your notes will be extremely helpful. I live in the midwest and my only contact with others sharing the same interests is the Internet. Thank you and it is a learning experience. Paul

Comments:
Spent some time lookin' at your new wreck and relics page... great pics... love the old stuff but haven't got any on page (yet) though

Comments:
A great Web Site. Keep up the good work!

Comments:
real nice site enjoyed the tips, picked up a few pointers. tks

Comments:
DEEP IN THE HEART OF TEXAS, CITY OF McALLEN,MEMBER OF THE, RIO GRANDE VALLEY MODEL RAILROAD CLUB, ABOUT 40 MEMBERS. HAVE INJOYED CHECKING YOUR WEB SITE, KEEP UP THE GOOD WORK.SEE YOU LATER, LYLE.

Comments:
Very impressed with your work. Will come back later for a more detailed look, especially at the layout drawings. Thanks for sharing your work via WWW.

Comments:
Pas mal du tout et les photos s'ouvrent vite. Leon Dochy Pecq Belgium

Comments:
Just satup my own web page was hopin you would link to it . Thanks

Comments:
I really liked you website. I too have thought of a garden train, but being that I am into N scale, my backyard would look more like it were mouse infected than a railroad! Good work!

Comments:
Just had to drop you a line about your page.I am new to this and just installed a layout in the backyard in the middle of December and have to say your site is the best and most informative,I use mostly aristo products and your page is the cats meow as far as aristo info goes thanks again. Rodney Benner

Comments:
Holly %^%$#@, what an IMPRESSIVE site; an excellent job. Keep up the good work. A+ David

Comments:
Your information is very interesting and of course enjoy news of other Railroaders. I am starting this spring my second garden railroad.

Comments:

Comments:
Extremely good info, thanks George

Comments:
Great technical info. Thanks for the help.

Comments:

Comments:
Great site, George. I've learned a lot and have your site bookmarked for continued reference. Tried out your method of shortening inter-car distance on AC heavywts and it works fine. Need to study your method of programmng TE more...I'm an electronic doof s, I'm afraid.

Comments:
Great site, the information is great, and your recent DCC experiences have been a real help!

Comments:
best thing i have found yet thanks from a new large scale modeler

Comments:
Hi George, What a great site. The tech tips are invaluable. I keep coming back to it when in need. You provide a wonderful service to the model railroad community. Keep up the great work.

Comments:

Comments:

Comments:
Just wanted to thank you for providing such an extensive body of information for those of us new to large scale. Without your tech tips I am sure many would leave the hobby in frustration. Thanks again.

Comments:
Have a starter set. I'm trying to learn all I can about garding/outside trains. I have a small backyard and my train is on my bank in the back yard. The train travels most up more than 2% grades. Any suggestions on weight or traction.

Comments:
Very nice. Full of helpfull tips and suggestions.

Comments:
thanks, excelent info . in ref to shay. i purchased one 12/97 took it apart as per video screw holes where the cover screw are were ckacked or broken. i glued them back. also after some use the pick up balls sticking in the melting plastic that holds them. i have e=mailed bachma n about problem requesting a power truck housing. thanks again for a GREAT site thomas s. wagner 516 emerson st. phila. pa. 19111 fax 215-745-1370

Comments:
Wow!!! great pictures, neat basement, great digest on couplers. I will have to come back to this site to get more information. thanks r

Comments:
I've modeled in N and HO, but large scale is new to me. Your site is the most useful I've found so far. I have a couple of Bachman 4-10-0's and a Bachman Climax. Your tips on these will be particularly helpful. Thanks!

Comments:
Great site I,m new to this hoppy, and you have a lot of great info that easy to find and follow. I know I will come back here over the next months to help me plan and understand what I need to do to get what I want. Keep up the great work Regards wolfgang

Comments:
Just starting out in G Scale and picking up all the imformation I can. I especially appreciate all your work and articles. My backround is an Airline Pilot, USAirways 34 years, A & P Mechanic and Electrician. Using all your information Thanks Eric

Comments:
Thanks from one of the newbes--I've been in H.O. for several years but now have the Garden Bug. Your info is quite helpful as I find there are many things that are different between the two scales. I live near Las Vegas,Nv. so if you ever take a trip to " in City" look me up and i'll show you the town. Thanks Again Joe Raines

Comments:
Perfect timing. Miriam and I were just wondering why our batteries died so quickly. I'm an electrical engineer, so I think I can handle the power conversion on the passenger cars. We have just recently gotten into model railroading and have the perfect ba kyard (with two fish ponds and a stream) to make a garden. Granted the fish are a bit out of scale for the train, but we'll work that out later. Steve

Comments:

Comments:
I have been working on a Bachmann smoke unit from a Big Hauler. Now I know what may have started the problem. I had left power on the unit and ran it dry. After reading your tip I will have to figure out what next. Nice page and the information is very usefull to newbes like my self. Thanks, Bob

Comments:
Im new to the hobby I don't even own any trains at this moment but after seeing your page i have the bug now. thanks for all your support to the hobby p.s. the link to tried and true trains won't connect i think because it starts with wwV instead of www.

Comments:
Like your site many usefull tips .Iwell be visting your site often. As anote I have the USA trains locomotive GP9 in Great Northen colors it to has steam genertor vent Had same gear noise after runing a little bit things cleared up ok .Locomotive runs wel pulls good I am very happy with it

Comments:
Thank you for sharing all this great info with those of us just starting out. It's great!

Comments:
I found this site very interesting with lots of information about model trains. As a beginner to this hobby the most interesting stuff is the maintenance and your personal experiences eith different manufacturers . Currently I have Backmann Gold Rush trai set. I am in a process of installing it in my sons bedroom along the walls below a foot from the celing. The room is 10x12 feet. Please let me know, if there is any manufacture faults in the train set that you are aware-of. Thanks

Comments:
Just found your site. Very interesting especially for someone who is brand new to the hobby. I am sure I will return often in the future. John Wilcox jbwilcox@hotmail.com

Comments:
Great Site. I am SEARCHING IN VAIN for Lionel L.S. Christmas boxcars from 1995, 1996 & 1997 for my daughter's train. If you have one to sell, or know where I could find any one, please email me.

Comments:
Your tips have been extremly helpfull.I am doing battery power with the TRAIN Engineer. I am experimenting with three 6volt lead acid batteries in a FA/FB combo in order to have more speed than a 12volt lead acid battery. It works but appears to be to he vy. Problems keep cropping up with shorts. Please keep up your excellent work. Thanks!

Comments:

Comments:
Re: Alaska I spent a month in Alaska last summer and also rode the WP&YR and Alaska RR. Those GE diesels on the White Pass were built especially for the WP&YR. The conductor on the train was a walking history book, but unfortunately I forgot most of the history of the GE's. As I recall several were sold off during tough financial times. Outside of Fairbanks there is a bed and breakfast "Forget Me Not Lodge/The Aurora Express". In addition to a modern house and an excellent breakfast, Susan and Mike Wilson have aquired two Pullman cars (I believe they were orginally on the UPRR and then he Alaska RR) that had been previously used for hotel rooms by the Denali State Park Hotel. These cars and a caboose have been converted in elegant suites. They have a very interesting video of the overland move of these cars to there current site. We also traveled by car ferry from Valdez to Whittier. To get from Whittier to Portage and the main (only) Anchorage-Seward highway is by an eighteen mile auto ferry. You exit the car ferry and drive on to a series of connected flat cars and have a shor ride thru two long and dark tunnels. Very unique. Enjoy your site.

Comments:
Have learned a lot from your site, and keep coming back to pages on turnout control, FA-1/FB tuneups, etc.. Remember reading about diode matrices in Model Railroader at least 20 yrs ago. Keep up the good work, you have helped a lot of people.

Comments:
George, a very nice site. I have an outdoor G layout with 120 m. of rails. I run only LGB (up to now). On your page rls/rls_shays.html, I think the second photo is a Class A Climax (see http://members.xoom.com/climaxloco) Greetings from Belgium Patrick

Comments:

Comments:
Thank you for some very informative articles on the Shey. I ,purchased it for my wife last season and am afraid to really touch it. I am a lionel/ mth person myself. My son is into HO. Thanks again.

Comments:
Enjoyed your trip on the AR. In Aug '88, we took a Westour on MS Noordam, Vancouver to Juneau, flew to Anchorage, AR'd in front seat first full dome via Denali sightseeing to Fairbanks, motorcoached to Prudhoe Bay. Videotaped VHS the entire rail trip. ...FYI... Enjoying my visit to your homepage et al. Mark

Comments:
George, have read many of your "tips" on operational improvements, great work ! I also like doing M/u lash ups, using a "sub-mini" plug and jack system. To deal with directional/polarity problems I installed a switch to reverse jumper polarity only. This allows for one,small device to be used, with good durability.

Comments:
George like your page. I may be looking in the wrong place I'm looking for "O" scale LGB Sorry for my edecate Thanks for your help Cody Co.

Comments:
Help! I'm very new to the graden railroad hobby. I will begin my layout soon and I have A LOT of questions. Power??? DCC??? I am planning on a large (500 or more feet of track) and I am confused about the best power pack to buy. I am also very intere ted in "wireless" control of my train (an AristoCraft Pacific with four heavyweight cars). I am looking at the Bridgeworks Magnum power pack. I live in Memphis, Tennessee and don't know if track power is best. You make mention of areas of the country w ere track power is not optimum. Is Memphis one of those places? Can you help or can you recommend a book which will help me? thanks for the great information on your page.

Comments:
Hello George. Been real busy. Would still like to see your layout.

Comments:
Avery nice site have not finished exploring it yet, but it is Bookmarked for my return. Thanks....Tom

Comments:
I am brand new to G Scale trains and have found your web site information invaluable. I have printed out several pages for future reference. You have answered many of my questions about roadbeds, tracks, power sources, etc. Thank you very much.

Comments:
George I could stay on all night GREAT site. You are really a help for the ``all thumbs` crew. I have some experience with the streamliners and running them with a set of UP F-7ABA I ended up using LGB hook/loop couplers. My layout is indoors, New Hampshire can ave cold weather, so my radii are limited probably 5` to 7`. One expensive fix for running the streamliners were LGB rollerbearing conductive wheels what a difference! Once again thanks for the information I amsure I will visit again. Manny Cardinale

Comments:
Great Site... Your hints and other answers for problems have been helpful for years.

Comments:
WOW!! I'm jealous. Just started collecting G-Scale. With time and money, and convincing my wife to keep the cars outside, I hope to start construction of my "railroad."

Comments:
Great work. I really appreciate the tips and information. As a beginner you have provided a great source of information and cleared up a lot of confusion. Thanks!

Comments:

Comments:

Comments:
I love your page. Bart Salmons, the Shay Guru was up for the first time yesterday and saw my layout for the first time and sent me a note later says he was giddy with the though that he had a place to run his no. e ,Mallet, IHave 325 feet of main line and I'm shooting for 1000 minium plus sidings. Now my question, what do I need to buy from Aristo so I can run one of my engines on battery power. I have the TE, but it's a waste to have that much track in a sigle folded 8 and only run one engine. I will try to rc two Aristo RS-3's Tom

Comments:
Just wanted to add my "Thanks" for the effort you have made and its resulting benefits to the Garden Gauge Community. I am new to Garden Gauge and right or wrong got into it in a big way not having the slightest idea of how complicated this "hobby" is. Without your help, Jonathan Polk's of Aristo, that of the internet "family" and a few local "G" Gaugers I would likely have given up in absolute frustration long ago. Keep up the excellent assistance. It is MOST appreciated. Jerry McColgan, Austin, Arkansas

Comments:
Sir: Having retired 5 yrs. ago & received bypast I have gotten into "G" and ponds I ahve started a layoutthat is about 30X40 that will go over our pond and your sight will be very helpful to me. Here in Oklahoma City our wenters are not to bad so I intend to work all year. Thanks again. Vince Ramo OKC

Comments:
I enjoy your articles very much, they have helped me alot. Keep up the good job!!!!!! THANKS!

Comments:
Excellent Info. Thanks for the service. I am a "Bachmann" man and finding your product reviews are very helpful. Have you tested their 2-4-2 T's Model # 81598 & 81599 ??

Comments:
I have successfully used a gallon of brake fluid in a plastic tool box to remove the paint from a Bachmann bobber caboose. However, recent projects involving an Aristocraft flatcar and USA Trains caboose has prompted me to issue the following warning. Although inexpensive, brake fluid as a paint stripper is very messy. Safety glasses, rubber gloves and old clothes are required as a minimum. It is also very slow. Both cabooses (cabeese?) took two days and a lot of messy work with a toothbrush. The flatc r unfortunately did not last two days. After its first soak, it fell to pieces and was not salvageable. The USA Trains caboose also developed a large crack all down one side and half way across the bottom. Many of the plastic grabirons also broke. Fortuna ely the van can be saved and the grabirons replaced. It appears that brake fluid reacts with the plastic in these large scale products and makes it very brittle. Anything under tension will crack or break. Although it can be brushed on and washed off to remove decals or lettering, I do not recommend that yo soak large scale plastic products in brake fluid. Paul Norton OVGRS

Comments:
Nice site. Great pics and thanks for all your info here and at largescaleonline

Comments:
Very informative. I am just starting out in the hobby and I have enjoyed your many articles. I am having a hard time understanding your wiring schemes. I don't know what all of the symbols stand for. Do the circles represent the diodes and the triangl s represent the relays? What does 10k, 1K and 20 microF stand for? Also do the 3 curved lines represent coil switch machines? Anyway, I hope that I can figure it out. Thanks for the info. Sincerely, Bryan Lilly

Comments:
It's simply amazing you've decoded the inner workings of much of the large-scale trains and accessories. Your information is generally more helpful than anything I can get from the manufacturers... thanks

Comments:
Excellent pics of the Riverside fall meet! Also very good commentary and notes. Thanks for sharing your fun. I'm a member of the Lake Shore Live Steamers, Kirtland, OHIO

Comments:
Thanks for all your tips and incredibly valuable info. I staffed a Union Pacific FA1 using your method, and it went a lot faster and better than my own hacking on a Santa Fe FA1

Comments:
Wonderful site, full of information. I am just starting out in garden railroading and I have found your site to be extremly complete and informative. You seem to have a handle on everything regarding "G" scale. I can't wait to attempt my first Howe Trus Bridge. Thank you.

Comments:
I have found your site very informative. You have done alot of work that is going to come in very handy to myself and many others in the Greater Vancouver Garden Railway Club located in British Columbia Canada. You must spend all of your free time on your pages, how do you find time to run trains?

Comments:
I like your name,and your lack of appology for ENJOYING a very popular hobby. I have an outdoor railroad, always under construction. I have named it JFF & NSI RR (just for fun, no scale intended).I run 136' elevated mainline, with a 10' truss bridge accro s the pond(water garden). I live in Michigan, thus the elevated line. I run all year, Except for 7 to 21 days, when super cold or icey weather prohibits. Keep up the good work Great RR!! John B Pedersen Three Rivers, Mi.

Comments:
Great site. Keep up the good work and thanx.

Comments:
Mank thanks for your tips on programming the Aristo Train Engineer. What a pity their instruction books are so badly done !

Comments:
Thank you so very much for your web site. I'm looking into getting into garden model railroading and you have so many answers for all my questions. there are still lots for me to learn. Your set-up looks really nice.

Comments:
Your tech sheets are great.

Comments:
Thank you very much not only for the information in your magnificent webb page, but also for your comments on LSOL. Being relatively new to the hobby(1 year), I have been able to learn from that source and from webb pages such as yours. I hope someday I c n help others as you have helped me. Frank Moreno

Comments:
Huge amounts of VERY useful info. I am building an indoor layout with Aristo track and switches. Started with a Big Hauler passenger set, added a Spectrum 2-4-2T and 6 log cars (two disconnects) and several other Bachman freight cars. Up 'til now I hav no scenery. Have been "debugging" from an engineering and wiring standpoint. What I read today will solve some problems I have been struggling with. Eventually, I hope to add scenery. My goal is to look like some of the West Virginia logging lines ar und the turn of the century. Again, thanks for sharing this vast pool of info with us newbys.

Comments:
thanks for info iam just starting

Comments:
George-Have been reading and learning from your tips and comments for a few months now and needed to say thanks. Have been active in electronics here for a bunch of years, but still learn from your well written and thought out info. Thanks and look forward to future developments! The RR here has a few pics on the web at www.rrtrains.com/tour/page2.htm The Wichita area club held an open house a few weeks back and one member had a new Sony Dig. Cam. and took a few shots. Again, you are doing a great job in documenting your findings and it is appreciated! Jack

Comments:
George, I just purchased a Bachmann Shay and appreciate your many fine tips! Thanks, Bill

Comments:
as someone moving large amounts of dirt in the UK at present its great to see what it can all look like at the end of the day. Very impressive

Comments:
George; THANK YOU. I have just finished downloading most of your tips for my reference book. There are a TON of things I will be trying in order to improve the performance of my "AUSABLE VALLEY RAILWAY". You have a GREAT site that I'm sure most of our fellow m delers really appreciate & get agreat deal of use from. I live in London, Ontario, Canada & have been building my layout for about 4 years now with, I'm sure, many more years till completion (as if a model railroad is ever 'completed'). I'm listed in the Largescale Online database for a more detailed 'look' a my pike. Thanks again for a truly fantastic website, it is MOST appreciated. Bill Fry

Comments:
Thanks for the tips page ... very helpful ! I just bought a Big Hauler set (Suwanee River Special) from Sams Club for $99. - All the wheels (engine, tender and the two passenger cars) are metal. - There are no wire or springs that appear to touch the rails. It appears to use the the metal wheels to get the power. - I have not opened the engine yet ... but there does not appear to be any bulge (for the gear) between the rear wheels. - The train sound (from the tender) always stops when the train stops. The above seem to contradict some of the findings on the web page ... could it be that Bachmann has made mods to the unit ? I am new to model railroading ... so a dumb question ... I am told that the Bachmann tracks are relatively cheap quality tracks ... which would you recommend (for outdoors / indoor use) ... I have heard some good things about the Aristo tracks ... any suggestions ?

Comments:
Great information source not only for beginners.

Comments:
George my friend, you amaze me! I have returned for a visit after a few months and you have just expanded to the point of calling yourself an encyclopaedia! Congratulations! And I appreciate the link you have added to the Toenail Ridge Shortline. Phil in Downunder-land

Comments:

Comments:

Comments:

Comments:
Enjoy you tips. Some day you need to publish a book with all of them in it. keep up the good work.

Comments:
It's great. I love your technical tips most. Thank you

Comments:
Nice page. Very informative. Keep it up.

Comments:
For myself and on behalf of all the volunteers at the Fairplex Garden Railroad. I truly want to thank you for a GREAT web page. All of your articles are a great help to the G-scale railroader. I have passed several on to fellow garden railroaders.

Comments:
This is the best G-Scale-Site I know! Great!!!

Comments:
Nice Site. Lots of good content.

Comments:
Thanks for your input. You have answered all my questions plus delt with a few unresolved issues for my heavyweights. Have you done any further modification to your cars other than the mechanical ones? On a tech note, your site's color pictures did not print out after page two, your problem or mine, I'm not sure. Keep Those Rails Shining! Ed Finch

Mike Dion - 09/18/98 17:06:37
My Email:mdion@harris.com

Comments:
I have an Aristo 0-4-0 and I am struggling with dirty wheels like you mention in your technical tips. You has stated that you were going to attempt to chrome plate the wheels. If you did, how did it work? Any other suggetions?? Great Site!

Comments:
I am re-build my garden railroad and your tips are just what I need. Thank you for taking the time to provide the tips. By the way I am looking for a pattern or mold for casting concrete walls with a rock or building block texture. Do you know where th se are available? Again thanks for your help.

Comments:
have not seen site yet

Comments:
have not seen site yet

Comments:

Comments:
Beautiful railroads and site! Should be very inspirational to many, George! You've got it "bad", indoor AND outdoor! The very best of luck to you in your endeavors! I'll be back often! Thanks. jim

Comments:
Your Fairfax Railroad pictures are wonderful! Thank you so much for taking the effort to set it up. We're at the beginning stages of our garden railroad and it is so inspiring.

Comments:
Great site and I learn alot.Thank you

Comments:
Dear George, I just wanted to let you know, that I agree with many others, this is the best site on the web. And, like many others I'm sure, I truly appreciate the time and effort you are putting forth in an order to help hobbiests around the world. Once again, than you.

Comments:

Comments:
George, Thank you for the great job you are doing for our hobby. I would like to suggest a topic for tech tips: scale distance and speed. Could you write up tips on how to convert your track length to scale length, how to calulate engine speed and references to actual speed different engines could go. I remember seeing a story in a magazine about utilizing a bicycle computer programmed with the dia. of a train wheel to get scale mph, any thoughts? Keith

Comments:
Very nice page. Especially like the tips. Have had problems with my RS3 trucks and now maybe I can fix it. Thanks muchly.

Comments:
Great Pages and Pictures!!! You have created a very nice railroad. Thanks for your efforts to share it. Tim

Comments:
Great web site. I appreciate the amount of work you have put into it and the help it provides large scale community. Thanks.

Comments:
Great info. Being new to Garden Railroading it is great to have someone who has "been there" and willing to share the experience and help avoid the mistakes. I'd appreciate your recommendations regarding the various track software packages. Thanks, Jerry McColgan

Comments:

Comments:
KEEP UP THE GOOD WORK. I REALLY ENJOY IT.YOU HAVE GIVEN ME A LOT OF GOOD IDEAS. THANK YOU HARRY

Comments:
George, I just HAVE to come back so often! Your website is the "gold-standard" in cyber railroad world, as your layout is.

Comments:
Just completed a 6' Howe Truss bridge based on your plans. It was an interesting experience. The bridge turned out great. My wife was impressed. Can't ask for much more. Thanks for your input and help to this hobby. We are just starting and your bri ge was my first effort.

Comments:

Comments:
Smile it's another railroad day. I enjoyed my visit. Doin' some cruising as I work up my track plan for my sometime soon RR. Tks

Comments:
Hi George, It's been a long time, but I'm back in the USA. My Big Hauler has a broken truck on the tender. So, I'm looking for replacement trucks that are more durable. I also need to learn how to disassemble an LGB 4010 loco.... want to re-do the little critter. Best regards, Matt

Comments:
I've just spent one and three quarter hours downloading about 2/3rds of your tips. Haven't read them all yet, but what I have seen looks very useful. I'm writing a handbook for the UK G-Scale society so I borrowed a modem (a s-l-o-w modem) and got a 30 day free internet trial (so my e-mail address is only temporary) to search the web for ideas and info. I'll e-mail you soon re. copyrights, etc on any f your stuff I think I could use.

Comments:
moved sound pot on pac.sound tend to water pop valve easer to adj @ turn off use small. volum pot from radio shak inst. in shay top under crank handel use rc chgr. and plug to chg, battery i hide it under now removeable coal. top thanks for scam. on dri er for two switch mach. arsto 5474 works great

Comments:

Comments:
WILL GET INTO IT A LITTLE LATER. I'VE ACCUMULATED MUCH OF THE EQUIPMENT, BUT HAVEN'T DEVELOPED THE COURAGE TO START ON MY OUTDOOR RR. I'VE NO EXPERIENCE, HENCE THE FEAR OF STARTING. MY CONCERNS ARE THE LAYING OF THE TRACK AND THE ELECTRICAL WIRING ETC.

Comments:
Thank you for the nice work you given the G scalers it's all so useful Thanks again

Comments:
Just tried your fix of using wire ties to hold a Big Hauler 4-6-0 motor in place. The engine is a Plus ET and WNC. Haven,t run it till now cause I didn't want to eat the gears. We've tried many other solutions in our club and I changed countless drive gears or members but the engines always at the gears. So far the ET has operated for over 6 hours and everything seems OK. I pass this info on to our club members that have 10-wheelers. Thanks for the help. Jon

Comments:
Just tried your fix of using wire ties to hold a Big Hauler 4-6-0 motor in place. The engine is a Plus ET and WNC. Haven,t run it till now cause I didn't want to eat the gears. We've tried many other solutions in our club and I changed countless drive gears or members but the engines always at the gears. So far the ET has operated for over 6 hours and everything seems OK. I pass this info on to our club members that have 10-wheelers. Thanks for the help. Jon

Comments:
Just tried your fix of using wire ties to hold a Big Hauler 4-6-0 motor in place. The engine is a Plus ET and WNC. Haven,t run it till now cause I didn't want to eat the gears. We've tried many other solutions in our club and I changed countless drive gears or members but the engines always at the gears. So far the ET has operated for over 6 hours and everything seems OK. I pass this info on to our club members that have 10-wheelers. Thanks for the help. Jon

Comments:
George, I thoroughly enjoy your entire site. It is one of most informative and well-organized sites I have ever visited. Most importantly, it has excellent content as well as navigation, something which many professional sites can't seem to get the hang of. I am new to the hobby of running trains, and I have learned much from visiting your technical tips pages, and continue to refer back to your tips before I purchase more equipment. I am curious how long you spend maintaining the website each month, and how long you spend on the actual hobby portion. Thanks again for providing such valuable information to the large scale community. My visit to your site was what convinced me that I wanted to get into this hobby. Best Regards, Juliet

Comments:
Wow! Great site. I'm new to this hobby and I see I can learn a lot from all your tips. Why don't you write a manual with all this information. I certainly would buy one. I'll be back often.

Comments:
The Directors of the Chenango Valley Scenic Railway wish to thank you for a great site. We're still in the planning and development stage, but are making steady progress thanks to people like you and the Southern Tier Garden Railroad Society.

Comments:
Great pages George, full of very useful information especially for the newcomer like myself. Was very dissappointed when I purchased my first LGB 1200 turnouts and discovered that the loco wacked the frog with a big jolt on every pass through the curved oute. After consulting your "LGB Turnout Tuneup" page, I spent this afternoon fashioning .025" x .25" x 6" brass strips (I notched along the bottom of the strip in order to fit over the ties) and installed them as suggested by Todd Brody. The loco runs th ough the turnouts as smooth as silk now. Thank you very much for posting your pages. I really don't know if I would have come up with that one on my own. What really bothers me though is that LGB continues to manufacture turnouts that don't work properly. I guess in the long run, the brass guard rail will last longer than a plastic one anyhow. Thanks again!

Comments:

Comments:
A great web site. Thanks for your time and effort

Comments:
I am new to Garden railroading and am just trying to learn about it. Also deciding if I want to get started with my first railroad.

Comments:
You have a great web site. and i am ever so thankfull that you have put so mouch time in it.. Keep up the good work.

Comments:
My prayers have been answered indeed! Your site has been a true blessing as I'm new to the large scale moving up from "N" scale. I'm still in shock after viewing all the great information based no doubt on your many year's of experince!Please keep up the ood work!

Comments:
Hi George, what a great site. thanks. here is more info for the cheap and dirty corragated siding, Precision Brand makes shim stock 6" wide by 100" long by .0015 among others. it crimps very well when cut in 3" X 6" strips placing the wide side into the crimper . you have manageable strips for roofing or siding. without a lot of the curvature that the aluminum cans create ! i couldnt have done it without you . and it patinas great. thanks shepp

Comments:

Comments:
relly great pages if i have questions on my aristo equipment i look at your site fist thanks ed rouse

Comments:
8:15 PM July 14 1998 Hi, great pages of information. I need all of the help that I can get. From my readings of your work I am sure that we have the same love for our hobby and the same kind of problums. Oh I am the one that sent you the note about using the springs on the pl stic hose for the smoke in an FA. T springs that fit best are the ones for the engine trucks and the passenger cars. I just got my first set of the new Astro wide switches and I will let you know how they workout as soon as I get time to work on my layout. Well I have to spend the next two week on location , "I am a television producer" so it will be after the 28th before I can do any railroading. Thank You for a great place to learn. Jerry... If you are ever in Ohio Jerry Beck Vanguard productions 7020 Huntley Rd. Columbus, Ohio 43229 614-436 4610 Home 614-882 0355

Comments:
8:15 PM July 14 1998 Hi, great pages of information. I need all of the help that I can get. From my readings of your work I am sure that we have the same love for our hobby and the same kind of problums. Oh I am the one that sent you the note about using the springs on the pl stic hose for the smoke in an FA. T springs that fit best are the ones for the engine trucks and the passenger cars. I just got my first set of the new Astro wide switches and I will let you know how they workout as soon as I get time to work on my layout. Well I have to spend the next two week on location , "I am a television producer" so it will be after the 28th before I can do any railroading. Thank You for a great place to learn. Jerry If you are ever in Ohio Jerry Beck Vanguard productions 7020 Huntley Rd. Columbus, Ohio 43229 614-436 4610 Home 614-882 0355

Comments:
Excellent site. Your Track Selection Tips were exactly what I need right now. I plan to go through all you pages and expect to enjoy the learning process. We have an area about 130' by 50' which we are turning into a garden and train yard - 1890 variet . Thanks for your efforts in putting the info out where we can see and understand it.

Comments:
I,m planning to start my own garden railroad , yours gave me a lot of ideas.What scale trains do you use,are they ho , n , or what? Please email me and let me know. My email is dpernell@3rddoor.com thanks,jason

Comments:
George, The info on digital cameras is outstanding! Thanks, Karl

Comments:
Your information is like gold to me concerning the cost of buying equipment needed in this hobby is expensive thanks again

Comments:
Read about your site in Garden Railways. Was having the same problems with the Big Hauler as someone else, and the suggestion was made to check here for some good ideas. Glad that I did. You answered many that the folks down the hobby shop couldn't. Appreciate what you are doing for the hobby, and the rest of us poor souls out there who are silently suffering.

Comments:
Fantastic site. I will be back as I begin my first venture into Large Scale (retire soon) It has all be N Scale to now (Swiss - sort-of)

Comments:
just getting started.this has beena great help

Comments:

Comments:
This is my first visit and by the looks not the last. I have a small railroad in my backyard. A few pictures are on my web page. I have not had a chance to look at all you tip, etc. but will return again. Ray Taylor

Comments:

Comments:
Excellent. I have learned alot about large scale. I am contemplating this scale, because the eyesight is slipping and the fingers just don't work as well as they used to. N scale is getting to me! Thanks.

Comments:
Sorry for the duplicate entry, but didn't realize that your guestbook didn't allow for html codes so my "TRAINS PAGE" didn't show up in the original posting. I have been in awe at all the info on your pages! Very fascinating and interesting reading. I a just starting out in G-Scale (got my first G-Scale for a birthday gift in Nov. 1997). Currenty I am using the New Bright G-Scale train sets. I will be back to this site often for more info. I got here from a link from Aristo Crafts website and I'm glad I did! BTW: My actual website is mostly about my 3 cats and I just added my Train page on June 25 with photo's of my current layout. Due to where I placed t and room constraints it's really not a large layout or elaborate, but for living in an apartment it gives me a good start in it! :)

Comments:
I have been in awe at all the info on your pages! Very fascinating and interesting reading. I am just starting out in G-Scale (got my first G-Scale for a birthday gift in Nov. 1997). Currenty I am using the New Bright G-Scale train sets. I will be back to this site often for more info. I got here from a link from Aristo Crafts website and I'm glad I did! BTW: My actual website is mostly about my 3 cats and I just added my Train page on June 25 with photo's of my current layout. Due to where I placed it and room constraints it's really not a large layout or elaborate, but for living in an apartment it giv s me a good start in it! :)

Comments:
Good news, I'm just getting started in the graden railway world, having purchased a LGB set many years ago. The wife now has the flowers, it's high time I now laid the track. So I am looking for webb sites that may be of help to me!

Comments:
What can I say? I seem to run oput of questions before your answers come to an end. Sitting over here in Germany, there is little choice besides LGB. I personally am interested in US railway, history and related stuff, LGB is trying pretty hard but their iew of the US is let's say "touristical". German railway hobby is a very serious thing, you can compare it to collecting stamps (you know: "I have 15 different models from the BR55 series of steam locomotives, six of them were never built, now I am waitin for the one come that has this special third dome..."). Keep up your good work. It's a pleasure to read your comments and hints. By the way - I happened to get an Aristo U25B and almost immediately started "tinkering": My idea: I replaced the two each "h adlamps" on the short hood and above the "switch compartment". The rear ones now are red LED's, for the front ones I installed something brand new over here: real white LED's that make a remarkable forward beam, powered some self-made fixed-output power s pply. The same LED's are installed as double beams between the loco numbers that are lit by four individual 5V-bulbs. Now you can see the light also on the opposite end of the tunnel...Best greetings from the Stuttgart area. Uli Wolff

Comments:
Am sure glad I stumbled across your website. Has made good informative sense. But in Programming my Train Engineer, I got stumped. In fifth paragraph, you mentioned "ten keys". No can find, or else I'm really out in left field. Thanks for your excellent w bsite.Will pass on to others in Florida GRS

Comments:
Now we have our island - time to get the train~thanks for the tips - will let you know when the railroad is up and running. Stop by and visit.

Comments:
I HAVE LOTS OF QUESTIONS FOR YOU..... I JUST NOW STARTING A NEW INDOOR LAYOUT, MY 2ND G SCALE. i LEARNED A FEW THINGS FROM THE FIRST AND AM ALWAYS LOOKING FOR MORE INFO WHAT RADII ARE YOU USING ON YOUR CURVES? I PLANNING ON HAND SPIKED CODE 250 RAIL WITH 42-48" RADII, BUT THIS LIMITS A LOT. BY LAYOUT WILL BE IN A RETANGLE 16' X 24' WITH A 42" X 12' YARD. THE LARGER RADII ARE REQUIRED FOR MY 3 TRUCK SHAY. IF YOU GO TO MY TRACKER-GBS SITE ON EACH WEB PAGE YOU CAN "CLICK" ON THE TRAIN LOGO AN IT WILL SHOW YOU SOME OF MY MODELS. AT ANY RATE I'M INTERESTED IN HEARING FROM YOU I LIVE IN ST LOUIS AND CAN BE REACHED AT 314-725-4477 DAYS 314-530-1797 NIGHTS BRIAN

Comments:
Just found your web site. It's Great.As I am getting serious and interested in graden railroads with my grand-son Wanted info for laying and setting new track Keep up the good job. any tips,info would be appriacted. Thanks Alan

Comments:
George, Great web site and I like your photos and tips on fine-tuning the equipment. Looks like you have put a lot of work into your railroad. My web site is in development. Hope it turns out as good as yours. Tom Cruse

Comments:
Fairly new to large scale. You have a great site, very informative, keep it going Thanks Dale

Comments:
George Very good web site, injoyed the photos of your layout. My son Craig and I have been in G-scale about nine years. Craigs in a wheelchair. I try to keep him busy with trains. He runs them and I get to do all the work. Thanks for sharing your layout o the internet. Don

Comments:
I received your reply reference roadbed/ballast on the LSOL workshop today and your response was exactly what I was looking for. Many thanks. I now intend to go through the rest of your homepage. When I tried to print out your page on ballast tips the fir t page came out very tiny in the left hand upper corner of the page; the second page came out fine. Is there some way that I can enlarge the type on your first page as I'd really like to print it out so I can read it. The answer is probably an easy one,bu I'm still learning not only about garden railways, but the intricies of the computer as well. Again my thanks, Mark

Comments:
George, On behalf of BoxCar Productions I want to thank you for your outstanding web page and your comments about the Fairplex Railroad and our video tape. I would like to send you a copy. Our way of saying thank you. Please e-mail me your address. If at anytime in future you would like additional information on the Fairplex please let me know. I'm also the P.R. man for the exhibit. I have 4 page complete history of the exhibit on PageMaker 6.0(Mac)or a hard copy I can send you. Again a very big than you. Ed Saalig, President BoxCar Productions.

Comments:
Outstanding job. Bob Toohey suggested I review your web page and I am really glad I did. I wrote and edited the Fairplex Garden Railroad videotape and we need someone with your talents and photo skills. I look forward to hearing from you. I'm glad you had a great time out at the Fairplex Garden Railroad. I was so busy with the video that I ave not had the opportunity to visit the layout. Thanks for updating me and sharing the layout with the world. I really appreciate that!!! Dennis

Comments:
One more hint you might want to add to your line on corrugated metal. As you no doubt have discovered, the plastic frame on the crimper is rather flexible so you can't put enough pressure on to get a deep crimp the first time and repeated runs cause the etal to dish out. The solution I found was to build a metal frame in a modified 'V' shape and drill axle holes at each end 5/8" apart. The axles are press fit but they do come out. Put your frame in a vise and start grinding out flat deeply corrugated met l on the first pass.

Comments:
I am essentially a scratch builder so everythig you have here is of interest. I will check back often.

Comments:
Hello George, Just bookmarking all the Large Scale pages from your guest book. Karl

Comments:
I really enjoy your site, and look to it anytime I have questions about my own trains/set-up, electrics, etc. Thanks for being there.

Comments:

Comments:
Great site, Just got into 'G' scale last year. Starting a layout outside, still under construction. In fact still working out the track plan. Enjoyed you review on the USA-trains GP9. I just pick on of them up my self. Looking for information on installing DCC decoders into the 4 engines I have. Doesn't look like any one users DCC on the big stuff. I'm using DCC on the HO trains I have.

Comments:
I very much enjoyed your website. Thank you for providing such useful information on G scale railroads. It will be very useful in my future endevours. Sincerely, Stephen A. Elias

Comments:
Greetings from Singapore .Great stuff! Thoroughly enjoyed your site and will come back when more time is available. I'm just getting started with G scale and find your info most helpful.

Comments:
Great site and usfull info. am interested in changing over my LGB and Brach to metal wheel. Do you know who makes the exact size other than OEM? Keep up the good work. From a "basher" not a scrachbuilder (but I do admire their work). I take liberties with my last name. Thanks, Ed

Comments:
Like the pictures. Some reat ideas for when I finally et to plan a layout.

Comments:
Dear George, Many thanks for your greatly appreciated technical tips. I had a chance to visit Aristo's "HQ" last March while at my son's address in Jersey City. Please pass my regards to Maryann and David (thanks again for the lift to Journal Square) Greetings from Be gium. Mike

Comments:

Comments:

Comments:
Your railroad is the best I seen on the web. I am in G but in a 12 by 24 ft. shed. I buy aristo bachmann and USA and cut apart and rebuilt as trains of 1930 and 1940.The aristo critter is a real buy for rebuilding as a center cab. You have a real railroa ===enjoy running I enjoyed seeing it er

Comments:
George - Thanks for all the great information you post. I, for one, appreciate the effort! I recently installed Pacific digital sound upgrade. New ones have connector extension for power wires - they must have read your comments!

Comments:
Thanks for the tips, I'm just getting started in garden rail roading. I just hauled in over 40 tons of dirt to raise my 14'x43' planter box. So as you can guess I'm almost ready to start on the tracks and topography of my layout. So I'm looking for any ne ideas!, I think I want to stay around the 18th. century using mining or loging as my main theme. I'm open to any suggestions you may have. I'm still lookine for others interested In G-scale around my home town Phoenix, Az.

Comments:
I am just getting into Large Scale, (from HO) What have I been missing? The gear is great and your page is very helpful. The tips that you provide help to make the transition from smaller scales easier as new problems\challenges present themselves in th s "G" Great Scale!.

Comments:
It's an excellent site George, not only for newbies, but for any large scale enthusiast. The information you have obviously painstakingly gathered is a real treasure trove of tried and true practices and remedies everyone should appreciate. Thanks a bun h!

Comments:
Great site. Answers a lot of my questions. I've been doing a lot of scratchbuilding in Large scale. It is really a lotof digging for info. reminds me of back in the early forties when my father and I scratch built almost everything we used in "O" gu ge. After many years in HO, I've decided to build outdoors. I have plenty of room in the backyard with woods on two side of my yard. Since there are no more baseball fields and soccer and foorball in my back yard, there won't be any messing around. I pl n to use radio control and lay my own track. Thanks for the info. Lou Malandra

Comments:
George - Excellent site!!! Now...help!? I read an article several years ago that explained how to lower aristocraft rolling stock to more acceptable heights. By any chance do you know of the article and what magazine it was in, and do you have any suggestions as how to successfully lower aristo stock? Many thanks. Pete

Comments:
write me!Grandma was a Schreyer, looking for info on Schreyer family

Comments:
always enjoy your site. hope someday to have a layout just as nice as yours. may have opportunity to meet you at garden railways convention

Comments:
George-- I don't know you personnally, but I have to stand up and say "Thank you" for all your wonderful tips and techniques for the garden railroads. I have used your pages on the Bachman Shay and am starting to work on my Aristo RS3, using hints from your page. I have had some trouble accessing your page, but I think I found the answer, so I will be spending more time browsing and downloading and pri